top of page

HOME
ONLINE STORE
- FLUK
SERVICES
- AnchorPoint Getting Started
GALLERY
CONTACT US
- Stay Up To Date
PODCAST
More

Use tab to navigate through the menu items.

Gallery

A Quick tutorial on how to use the negative volume models and the keel clamps in your fixtures.

Available now at jspeceng.com

#cnc #fusion360 #instamachinist #palletsystem #zeropoint

A Quick tutorial on how to use the negative volume models and the keel clamps in your fixtures.

Available now at jspeceng.com

#cnc #fusion360 #instamachinist #palletsystem #zeropoint

The Mechanical Anchor Point is finally here.

Based on a standard bt30 pullstud instead of expensive custom retention hardware.

The mechanical version releases with 1.5 turns of the 8mm Allen wrench and holds down with up to 1200lb of force.

Available now at jspeceng.com

#zeropoint #instamachinist #workholding #cnc #palletsystem

The Mechanical Anchor Point is finally here.

Based on a standard bt30 pullstud instead of expensive custom retention hardware.

The mechanical version releases with 1.5 turns of the 8mm Allen wrench and holds down with up to 1200lb of force.

Available now at jspeceng.com

#zeropoint #instamachinist #workholding #cnc #palletsystem

Anchor Points making life easy on the lk. I bought some ultem while at the knife shop the other day and wanted to make an ultem FLUK just because I could. Having a zero point system made setting up and running the job again super easy.

For more info on the Anchor Point family of work holding check out jspeceng.com

#cnc #instamachinist #zeropoint #palletsystem

Anchor Points making life easy on the lk. I bought some ultem while at the knife shop the other day and wanted to make an ultem FLUK just because I could. Having a zero point system made setting up and running the job again super easy.

For more info on the Anchor Point family of work holding check out jspeceng.com

#cnc #instamachinist #zeropoint #palletsystem

Been running the mechanical anchor point grippers on the mechanical anchor point. This setup felt super dumb but it worked.

#instamachinist #zeropoint #palletsystem #fusion360 #workholding

Been running the mechanical anchor point grippers on the mechanical anchor point. This setup felt super dumb but it worked.

#instamachinist #zeropoint #palletsystem #fusion360 #workholding

Mechanical anchor point preorder is now open.

Book your spot in line today

Link in bio

#instamachinist #workholding #palletsystem #zeropoint #cnc

Mechanical anchor point preorder is now open.

Book your spot in line today

Link in bio

#instamachinist #workholding #palletsystem #zeropoint #cnc

Zero point work holding for the win.

The Anchor point makes swapping pallets super quick and easy.

Pneumatic Anchor points are in stock and mechanicals will be for sale 14/02/26

#instamachinist #fusion360 #zeropoint #palletsystem #workholding

Zero point work holding for the win.

The Anchor point makes swapping pallets super quick and easy.

Pneumatic Anchor points are in stock and mechanicals will be for sale 14/02/26

#instamachinist #fusion360 #zeropoint #palletsystem #workholding

The Mechanical Anchor Point pre-order is now live .
Head over to our site to grab your spot and be the first to get a mechanical Anchor Point

#instamachinist #zeropoint #fusion360 #palletsystem #workholding

The Mechanical Anchor Point pre-order is now live .
Head over to our site to grab your spot and be the first to get a mechanical Anchor Point

#instamachinist #zeropoint #fusion360 #palletsystem #workholding

Did some tests today of the new Mechanical Anchor Point. It's a lot more rigid especially for side loads.

Pre order spot open on the 21st and units will be available on 14 Feb 2026

#instamachinist #fusion360 #zeropoint #palletsystem

Did some tests today of the new Mechanical Anchor Point. It's a lot more rigid especially for side loads.

Pre order spot open on the 21st and units will be available on 14 Feb 2026

#instamachinist #fusion360 #zeropoint #palletsystem

The first mechanical anchor point is fresh off the line. Planning to have them for preorder in the next two weeks and shipping batch 1 by end of Feb 2026.

#zeropoint #workholding #cnc #fusion360 #quickchange

The first mechanical anchor point is fresh off the line. Planning to have them for preorder in the next two weeks and shipping batch 1 by end of Feb 2026.

#zeropoint #workholding #cnc #fusion360 #quickchange

We added option on the website for those who would like to make a customer base/riser and make a mooring point or harbour using the anchor point bases.

Also keep an eye out for the mechanical unit coming in Feb

#cnc #zeropoint #instamachinist #fusion360

We added option on the website for those who would like to make a customer base/riser and make a mooring point or harbour using the anchor point bases.

Also keep an eye out for the mechanical unit coming in Feb

#cnc #zeropoint #instamachinist #fusion360

The anchor-point went through a few versions before it was released into the wild. We ran a V2 for almost a year before switching straight to a V4 on our production machine.

Available now link in bio

#anchorpoint #zeropoint #workholding #cnc #quickchange

The anchor-point went through a few versions before it was released into the wild. We ran a V2 for almost a year before switching straight to a V4 on our production machine.

Available now link in bio

#anchorpoint #zeropoint #workholding #cnc #quickchange

Batch 3 of the Anchor Point is in production and will be shipping first week of January.

#instamachinist #cnc #fusion360 #zeropoint #palletsystem

Batch 3 of the Anchor Point is in production and will be shipping first week of January.

#instamachinist #cnc #fusion360 #zeropoint #palletsystem

This is our current Anchor Point setup. We call it a harbor and have pallets that span all 4 units for increased rigidity.

#zeropoint #workholding #anodizing #anchorpoint #cnc #millbilly #quickchange

This is our current Anchor Point setup. We call it a harbor and have pallets that span all 4 units for increased rigidity.

#zeropoint #workholding #anodizing #anchorpoint #cnc #millbilly #quickchange

Birtha is sleeping in my shop for her last night. She heads to a new home tomorrow for a third lease on life. It's both a sad and happy day as she was the first big retrofit we did and has been the backbone of Jspec Engineering for 4 and a half years and she will be missed but the good way is waiting to come in and pick up the slack.

#instamachinist #cnc #newmachineday #smallshop

Birtha is sleeping in my shop for her last night. She heads to a new home tomorrow for a third lease on life. It's both a sad and happy day as she was the first big retrofit we did and has been the backbone of Jspec Engineering for 4 and a half years and she will be missed but the good way is waiting to come in and pick up the slack.

#instamachinist #cnc #newmachineday #smallshop

New machine day.

It's going to be a busy rest of the month getting this guy ready and getting birtha ready to leave.

#cnclathe #newmachineday #instamachinist

New machine day.

It's going to be a busy rest of the month getting this guy ready and getting birtha ready to leave.

#cnclathe #newmachineday #instamachinist

I my need more racks soon. Just installed the Anchor Point racks on the wall to store all my pallets.

#instamachinist #workholding #cnc #anchorpoint #zeropoint

I my need more racks soon. Just installed the Anchor Point racks on the wall to store all my pallets.

#instamachinist #workholding #cnc #anchorpoint #zeropoint

The wall of pallets. I may have a problem.

Anchorpoint is a large part of my workflow for the production parts we make so having lots of pallets makes sense.

Anchor points are available now the link is in the bio.

#instamachinist #cnc #fusion360 #workholding #workshop #rack

The wall of pallets. I may have a problem.

Anchorpoint is a large part of my workflow for the production parts we make so having lots of pallets makes sense.

Anchor points are available now the link is in the bio.

#instamachinist #cnc #fusion360 #workholding #workshop #rack

Here is a video for the dumb idea we discussed on @withintolerancepodcast

#cnclathe #instamachinist #cnc

Here is a video for the dumb idea we discussed on @withintolerancepodcast

#cnclathe #instamachinist #cnc

We are getting a replacement for birtha and the new lathe needs a name.

#instamachinist #cnc #jobshop #cnclathe #newmachine

We are getting a replacement for birtha and the new lathe needs a name.

#instamachinist #cnc #jobshop #cnclathe #newmachine

New shirts just dropped. Link in the bio

#instamachinist #cnc #lonemachinists

New shirts just dropped. Link in the bio

#instamachinist #cnc #lonemachinists

Running an Anchor point in non-ideal conditions but it works.

Making PTFE airplane parts.

#workholding #fusion360 #cnc #instamachinist

Running an Anchor point in non-ideal conditions but it works.

Making PTFE airplane parts.

#workholding #fusion360 #cnc #instamachinist

The anchor point really shines when it comes to long term cost of ownership. The per pallet cost is a fraction of the competition.

#zeropoint #workholding #instamachinist #anchorpoint #palletsystem

The anchor point really shines when it comes to long term cost of ownership. The per pallet cost is a fraction of the competition.

#zeropoint #workholding #instamachinist #anchorpoint #palletsystem

One of the fights from yesterday's tournament in the South African Robotics League

#sarl #combatrobotics

One of the fights from yesterday's tournament in the South African Robotics League

#sarl #combatrobotics

Another fun tournament. The most destructive bots we've seen so far. Had some weapon motor issues but came third. And am pretty happy.
#combatrobotics #combatrobots #subtractmanufacturing #sarl #southafrica

Another fun tournament. The most destructive bots we've seen so far. Had some weapon motor issues but came third. And am pretty happy.
#combatrobotics #combatrobots #subtractmanufacturing #sarl #southafrica

With the tarrifs changes coming into effect from 29 August the time is now to grab an Anchor Point while it still ships in under the tariff threshold.

#instamachinist #fusion360 #zeropoint #palletsystem #workholding

With the tarrifs changes coming into effect from 29 August the time is now to grab an Anchor Point while it still ships in under the tariff threshold.

#instamachinist #fusion360 #zeropoint #palletsystem #workholding

New colour options available on the Anchor Point.

Link on bio

#instamachinist #fusion360 #zeropoint #cnc #workholding #anodizing #jobshop #jobshopmachinist

New colour options available on the Anchor Point.

Link on bio

#instamachinist #fusion360 #zeropoint #cnc #workholding #anodizing #jobshop #jobshopmachinist

We added some options to the website for custom ano on the anchor points.

There are some more options in the works and will post them tomorrow.

Link to the online store is in our bio.

#cnc #instamachinist #zeropoint #custom #anodizing

We added some options to the website for custom ano on the anchor points.

There are some more options in the works and will post them tomorrow.

Link to the online store is in our bio.

#cnc #instamachinist #zeropoint #custom #anodizing

After some technical difficulties we finally got it done.

#podcast #instamachinist #thelonemachinist

After some technical difficulties we finally got it done.

#podcast #instamachinist #thelonemachinist

Made a probe cover to limit the amount of coolant sprayed directly at the seals.

#instamachinist #fusion360 #cnc #jobshopmachinist

Made a probe cover to limit the amount of coolant sprayed directly at the seals.

#instamachinist #fusion360 #cnc #jobshopmachinist

Check out the Anchor point zero point pallet system.

available now on our website link in bio.

#zeropoint #cnc #cncmilling #instamachinist #jobshop #fypp #workholding

Check out the Anchor point zero point pallet system.

available now on our website link in bio.

#zeropoint #cnc #cncmilling #instamachinist #jobshop #fypp #workholding

Quick tip while we making Anchor Point pads.

#lathe #cnclathe #instamachinist #workholding #anchorpoint #linuxcnc

Quick tip while we making Anchor Point pads.

#lathe #cnclathe #instamachinist #workholding #anchorpoint #linuxcnc

Had a great run today in the @sarl_combatrobotics destructive tournament we came second over all and had an absolute blast.

Check out @subtractmanufacturing if you need parts made for you bots.

#combatrobots #battlebots #nhrl #combatrobotics #firstrobotics #robotics
#subtractmanufacturing

Had a great run today in the @sarl_combatrobotics destructive tournament we came second over all and had an absolute blast.

Check out @subtractmanufacturing if you need parts made for you bots.

#combatrobots #battlebots #nhrl #combatrobotics #firstrobotics #robotics
#subtractmanufacturing

Batch 2 is well underway.
Some of batch one are still available and there is a preorder for batch 2 eta mid July

Links in bio

#instamachinist #fusion360 #cnc #zeropoint #palletsystem #anchorpoint #workholding #production

Batch 2 is well underway.
Some of batch one are still available and there is a preorder for batch 2 eta mid July

Links in bio

#instamachinist #fusion360 #cnc #zeropoint #palletsystem #anchorpoint #workholding #production

Making Anchor Points on the Anchor Point. Batch 2 is in full swing and should be available mid July.

Link in bio

#instamachinist #fusion360 #zeropoint #cnc #palletsystem #jobshopmachinist #anchorpoint #workholding #production

Making Anchor Points on the Anchor Point. Batch 2 is in full swing and should be available mid July.

Link in bio

#instamachinist #fusion360 #zeropoint #cnc #palletsystem #jobshopmachinist #anchorpoint #workholding #production

How we pack our anchor points so they arrive safely anywhere in the world.

Anchor point Link in bio

#instamachinist #fusion360 #zeropoint #palletsystem #jobshopmachinist #workholding #anchorpoint

How we pack our anchor points so they arrive safely anywhere in the world.

Anchor point Link in bio

#instamachinist #fusion360 #zeropoint #palletsystem #jobshopmachinist #workholding #anchorpoint

Meet the Isotie a unique billet aluminium bow tie with a detailed isogrid pattern to stir up conversation.

Link in bio

#wedding #isotie #instamachinist #jobshopmachinist #fyp #bespoke #groomsman #suit #tux #event #specialday❤️ #aerospace #rockets

Meet the Isotie a unique billet aluminium bow tie with a detailed isogrid pattern to stir up conversation.

Link in bio

#wedding #isotie #instamachinist #jobshopmachinist #fyp #bespoke #groomsman #suit #tux #event #specialday❤️ #aerospace #rockets

We have a wedding this weekend so i made the iso-tie so I can look fancy. Also making a YouTube video on how to use the anchor point while I made this.

#instamachinist #fyp #cnc #jobshopmachinist #workholding #isogrid

We have a wedding this weekend so i made the iso-tie so I can look fancy. Also making a YouTube video on how to use the anchor point while I made this.

#instamachinist #fyp #cnc #jobshopmachinist #workholding #isogrid

Assembling an anchor point for an order that came in today.

For more info the Link is in the bio

#instamachinist #fyp #fusion360 #zeropoint #jobshopmachinist #anchorpoint

Assembling an anchor point for an order that came in today.

For more info the Link is in the bio

#instamachinist #fyp #fusion360 #zeropoint #jobshopmachinist #anchorpoint

Anchor point in action with our double station self centering vise setup. We can now quickly swap in our vises when we need them for opp ones and swap back to pallets for finishing oops in a matter of seconds.

Anchor points are available on our website link in bio

#instamachinist #fusion360 #cnc #palletsystem #jobshopmachinist #anchorpoint

Anchor point in action with our double station self centering vise setup. We can now quickly swap in our vises when we need them for opp ones and swap back to pallets for finishing oops in a matter of seconds.

Anchor points are available on our website link in bio

#instamachinist #fusion360 #cnc #palletsystem #jobshopmachinist #anchorpoint

Sharing my coolant circulation solution with @audacity_micro and @rebecca.wolfinger

Search @jamiepeacock_2596015 on printables for the files

#cnc #instamachinist #coolant #shoplife

Sharing my coolant circulation solution with @audacity_micro and @rebecca.wolfinger

Search @jamiepeacock_2596015 on printables for the files

#cnc #instamachinist #coolant #shoplife

The Anchor point zero point system is now live. Link in bio

#instamachinist #zeropoint #fusion360 #palletsystem #anchorpoint #workholding #jobshopmachinist

The Anchor point zero point system is now live. Link in bio

#instamachinist #zeropoint #fusion360 #palletsystem #anchorpoint #workholding #jobshopmachinist

Who we are and why we built the Anchor point. Part one of 6 shorts coming soon

Link in bio for more info on the anchor point quick change pallet system

#instamachinist #fusion360 #zeropoint #workholding #quickchange #anchorpoint #cnc

Who we are and why we built the Anchor point. Part one of 6 shorts coming soon

Link in bio for more info on the anchor point quick change pallet system

#instamachinist #fusion360 #zeropoint #workholding #quickchange #anchorpoint #cnc

Made a prototype mooring point base for the anchor-point zero point systems.

#instamachinist #zeropoint #fusion360 #palletsystem #quickchange

Made a prototype mooring point base for the anchor-point zero point systems.

#instamachinist #zeropoint #fusion360 #palletsystem #quickchange

Finalizing the V4 of the Anchor point as we prep for going to market.

#instamachinist #fusion360 #zeropoint #palletsystem #cnc #madeinsouthafrica

Finalizing the V4 of the Anchor point as we prep for going to market.

#instamachinist #fusion360 #zeropoint #palletsystem #cnc #madeinsouthafrica

Alpha V4 is assembled and will go into testing this week while V3 is beta tested. We will be releasing the V4 as the final production version. Features and drawings will be available this week on our website.

Sign up through the form on our website to get the latest info when it's released and be the first to know when units go on sale.

#instmachinist #zeropoint #anchorpoint #workholding #cnc #palletsystem #quickchange

Alpha V4 is assembled and will go into testing this week while V3 is beta tested. We will be releasing the V4 as the final production version. Features and drawings will be available this week on our website.

Sign up through the form on our website to get the latest info when it's released and be the first to know when units go on sale.

#instmachinist #zeropoint #anchorpoint #workholding #cnc #palletsystem #quickchange

First Anchor Point V4 body is off the machine we will anodize it tomorrow and start testing. V4 is a significantly better body design. The mechanism and mechanics are identical to V3 but the form factor is far better.

#instamachinist #zeropoint #anchorpoint #workholding #palletsystem

First Anchor Point V4 body is off the machine we will anodize it tomorrow and start testing. V4 is a significantly better body design. The mechanism and mechanics are identical to V3 but the form factor is far better.

#instamachinist #zeropoint #anchorpoint #workholding #palletsystem

Episode 10 was the first guest episode and we had the amazing @justinsgray on from @toolpathlabs we covered a lot of interesting stuff.

#instamachinist #business #podcast #smallshop #businesspodcast

Episode 10 was the first guest episode and we had the amazing @justinsgray on from @toolpathlabs we covered a lot of interesting stuff.

#instamachinist #business #podcast #smallshop #businesspodcast

Working on the Anchor point packaging. I'm pretty happy with it so far.

#anchorpoint #zeropoint #palletsystem #cnc #workholding

Working on the Anchor point packaging. I'm pretty happy with it so far.

#anchorpoint #zeropoint #palletsystem #cnc #workholding

Along with episode 9 of The Lone Machinist podcast we started an after show for the patreon members where we get into some stuff we don't want shared with everyone. Like some projects we are working on and some future plans stuff.

#podcast #patreon #instamachinist

Along with episode 9 of The Lone Machinist podcast we started an after show for the patreon members where we get into some stuff we don't want shared with everyone. Like some projects we are working on and some future plans stuff.

#podcast #patreon #instamachinist

Finalizing the assembly of the beta units.
Anchor point is coming soon.

#instamachinist #zeropoint #cnc #palletsystem

Finalizing the assembly of the beta units.
Anchor point is coming soon.

#instamachinist #zeropoint #cnc #palletsystem

.pro-gallery-wix-wrapper {display: block !important;} .pro-gallery-wix-wrapper .gallery-item-container {opacity: 1 !important; display: block !important;}

Red Pepper Robotics

S A R L

Terms of Service

© 2022 JSpec Engineering

JSpec Engineering

info@jspeceng.com

0846272149

bottom of page